PROJECT 3A BLACK BOX (PECTORIAL)

THE PROCESS OF CREATING THE BOX

I had use Mounting board as material to create the box structure as the mounting box is a hard material that can strengthen the box structure. I also used hot glue gun to hold the each surface of square together strongly.

The picture on right shows that the box improper surface as you can see there are many small pores left although is stick by hot glue gun.

 

Therefore i used the black tape to make the structure more stronger and solid so that the cube is not easily spoiled.

 

The Arrangement Of My Cube

• 8 cube is put together to form a big cube

• The first cube is moved to the left.

• Then it is moved downward.

• After that move the cube that have green colour on top to infront.
• 
• Then move the whole section(the four box on left hand side) backward until it show out half of the surface of the last two unmoved cube(which is right side in the picture)

• After that move the first upper right side cube to right 

•  Then move the cube just now downward.

•  Then continue move the cube backward until it is parallel with the box next to it.

•  Lastly turn the whole structure upside down to form the design of mine structure.

THE VIEW OF THE STRUCTURE

THE TOP VIEW

THE SIDE VIEW

 

THE FRONT VIEW

ORTHOGRAPHIC OF STRUCTURE

IDEA OF MY STRUCTURE FROM

Actually the idea of mine are come from building.Due to i very amaze those building the shaped wired and looked unstable such as the base of the building is smaller which need to support the big structure above . Those building such as the beijing national stadium(the bird's nest),walt disney concert hall.I am very impressive with those buiding as its involved critical calculation to produce the unique design.Therefore I decided to put my cube that way to show that even though the base of the structure is small but still it can spport the bigger structure above it.

Project 2B Nature structure( Space and Depth)

These are the nature structure that catch my attention :

The maple leaf due to it colour texture and unique shape,

The palm leaf due to its shape and colour that give us a tunnel effect,

The clover as it is rare and represent lucky.  

 

PROCESS OF ASSIGNMENT
The process of colouring the maple leaves


Before adding the triangle geometric structure into the light blue area

After adding the triangle into the light blue area



The clover on a palm leaf

The maple leaf that coloured in red and yellow colour

The palm leaf that is on the water

The water that used triangle as the geometrical structure

Overall combination for final product

Project 2A Man Made Structure

THE PROCESS OF PROJECT 2A

 This is the most complicated part for me to draw as it takes time and patient to form the
structure of stairs systematically.

 After the shape of stairs complete i feel relieve and happy about it although its not excatly the same as the picture taken due to the limitation of my drawing skill...but i truely hope tat my drawing skill will improve and grow as time goes by.









This is the part when most of the object is shaded..

FINAL PRODUCT



Project 1B:ME MYSELF & I (TONE & TEXTURE)

Project A1:My Link(Lines & Shape)

AFTER IMPROVING ITS COLOUR TEXTURE